E-Props 2-blade for Pipistrel Taurus
EUR
1010.00€ VAT excl.
==> Manufacturing time: 2 to 3 weeks
2-blade carbon propeller, ground adjustable pitch
For motoglider Pipistrel TAURUS Rotax 503 red 2.58
Tractor configuration
Diameter: 160 cm / 63 inch
Total weight (blades and hub) = 1,5 kg
Carbon blades with Titanium leading edge protection
Specific hub in aluminium
Drilling : 6M8d75 (adapted for retractable propeller)
Delivered with bolts & digital pitch adjustment tool
First recommended pitch = 15°
Performance (compared to the original Pipistrel wooden propeller) :
- gain of more than 20% of climb rate
- speed of rotation decreasing by about 100 rpm when climbing towards 100 km/h and recovery of the initial speed (6550 rpm) towards 125 km/h
- propeller stop after ignition cut-off almost instantaneously, at a reasonable speed 20% above the stall speed
- strong decrease of vibrations
- weight gain of 1.2 kg
---------------
PILOT FEEDBACK:
This propeller is far better than the original wooden propeller sold by Pipistrel, on all points. I love it, so nice and reactive.
J-L.M. (2024-08-07)
Our Taurus has a much higher rate of climb with the eprop. We recommend this propeller to all Taurus owners.
J.D. (2023-06-28)
The best propeller by far for the Taurus. Much shorter take-off, and the propeller stops immediately. I'm delighted.
C.C. (2023-03-07)
This is the 3rd Pipistrel Taurus that I have equipped and I helped 2 pilots to make the documents for the French Civil Aviation Administration (DGAC).
The gain in safety is important because the propeller stops immediately, contrary to the wooden propeller which imposes to slow down its speed and to put itself in danger of stalling.
No more need to weld the jacks of the exhaust pipe which cools down more slowly.
The Rotax 505 gives all its power. At Serres airfield (LFTM), if the wind is south and therefore backwards, with the wooden propeller, I asked for towing.
Certainly 1 gain in glide if the engine blocks, pylon out.
Gain in rate of climb.
1 kg of gained.
T.G. (2022-05-27)
Since the installation at the end of 2020 and about 2 hours of operation, everything is going very well and I can only advise the installation of this propeller on the Taurus.
H.F. (2021-03-08)